Medonics & Co. Physiotherapy Equipment

Medonics is a well-respected brand in the market since 1985 catering to the evolving needs of the medical sector ensuring the supply of finished products that are high in quality and performance and offering efficient after sales service.

Ultra Sound Therapy Unit

Model No: SSU- 15M

DIMENSION

· Width – 26 cm.

· Height – 9.5 cm

· Depth – 22 cm

· Weight – 1.9 Kg.

SPECIFICATIONS

· Input: 160-260 V, AC, 1 Ph, 50 Hz

· Continuous Mode Output:15W

· Pulsed Mode: 20% & 50% Output: 21 W

· Frequency: 1000 KHz

Control & Indications: Microcontroller based 2x16 Character panel displays time, modes of treatment and output level.

Standard Accessories: Matching case, applicator, mains cable and instruction book.

Ultra Sound Therapy Unit

Model No: SSU- 24

DIMENSION

· Width – 26 cm.

· Height – 9.5 cm

· Depth – 23.5 cm

· Weight – 1.2 Kg.

SPECIFICATIONS

· Input: 160-260 V, AC, 1 Ph, 50 Hz

· Continuous Mode Output:15W

· Pulsed Mode: 1:1,1:2,1:4,1:7&1:10 Output: 21 W

· Frequency: 1000 KHz

Control & Indications: 2 digit 7 segment display indicates output and treatment time.

Standard Accessories: Matching case, applicator, mains cable and instruction book.

Model No: SSD100-II

DIMENSION

· Width – 26 cm. Height – 13 cm

· Depth – 34 cm Weight – 4 Kg.

SPECIFICATIONS:

· Fully Solid State Circuit

· Input: 150-260V AC 1 Ph, 50 Hz

· Output Power: 100 Watts Adjustable.

· Output Frequency: 27.12 MHz.

· Timer: Digital 1-99 mins. Adjustable

Standard Accessories: One pair of condenser pads, mains cable, instruction book.

Optional Accessories: Condenser pads in three different sizes

Short Wave Diathermy

Model No: MF– 5

DIMENSION

· Width – 16.5 cm.

· Height – 9.0 cm

· Depth – 16.5 cm

· Weight – 1.2 Kg.

SPECIFICATIONS

· Input: 220/230 V, AC, 1 Ph, 50 Hz

· Intensity: 0-90 Volt adjustable.

· Surge Duration: 0.5 Sec. - 5 Sec adjustable.

· Rest Period: 0.5 Sec. - 5 Sec. Adjustable

Standard Accessories: One pair of rectangular conductive rubber electrodes, holding bands, mains cable, instruction book and carrying bag.

Faradic Stimulator

Model No: MG – 5

DIMENSION

· Width – 16.5 cm.

· Height – 9.0 cm

· Depth – 16.5 cm

· Weight – 1.2 Kg.

SPECIFICATIONS

· Input: 220/230 V, AC, 1 Ph, 50 Hz.

· Intensity: 0-90 Volt adjustable.

· Duration: 25 milisec to 250 milisec adjustable.

· Interval: 0.5 sec to 5 sec adjustable.

Standard Accessories: One pair of rectangular conductive rubber electrodes, one pencil electrode, holding bands, mains cable, instruction book and carrying bag.

Galvanic Stimulator

Model No: 4-T

DIMENSION

· Width – 27.5 cm.

· Height – 9 cm

· Depth – 21 cm

· Weight – 1.2 Kg.

SPECIFICATIONS:

· Input: 220/230 V, AC, 1 Ph, 50 Hz

· Constant Mode: Rate variation from 20-100 pulse per sec, Pulse width: 200 us.

· Modulated Mode: With a cycle of 2sec on and 1sec off period.

· Burst Mode: 2 bursts of 10 pulses emitted per sec, pulse width being 200us.

· Output channels: Four output channels with individual Intensity control.

Standard Accessories: Four pair of rectangular conductive rubber electrodes with holding bands, one pencil electrode, mains cable, instruction book and carrying bag.

TENS

Model No: 4TM

DIMENSION

· Width – 29.5 cm.

· Height – 9.5 cm

· Depth – 25 cm

· Weight – 2.3 Kg.

SPECIFICATIONS

· Input: 220-230 V, AC, 1 Ph, 50 Hz

· Output:

Continuous Mode: Pulse rate can be set between 10 and 200 PPS. Pulse width: 200 usec.
Modulation Mode: Pulse rate as above. Duration can be set from 5 to 30 sec.
Slow Mode: Same as modulation mode but output will rise gradually and fall to zero also gradually.
Burst Mode: Pulse rate 100 PPS, Duration 0.1 Sec. Interval 0.4 Sec. Two burst of 10 pulses per sec.
Output channels: Four output channels with individual Intensity control.
Control & Indications: Microcontroller based 2x16 Character panel displays time, modes of treatment and output level of all channels.

Standard Accessories: Four sets of rectangular conductive rubber electrodes with holding bands, mains cable, instruction book and carrying case.

Digital TENS

Model No: STMD-III

DIMENSION

· Width – 26 cm.

· Height – 9.5 cm

· Depth – 22 cm

· Weight – 1.9 Kg.

SPECIFICATIONS

· Input: 160-260 V, AC, 1 Ph, 50 Hz

· Output:

Galvanic-0-120V D.C.
Interrupted Galvanic: Rate adjustable from 0.16 p.s. to 100 p.s. Duration adjustable from 0.01 m.sec. to 300 m.sec.
Faradic: Continuous mode 100 pulse per second.
Surged Faradic: Contraction and Rest period adjustable from 0.5 sec. to 5 sec.
Control & Indications: Microcontroller based 2x16 Character panel displays time, modes of treatment and output level.

Standard Accessories: One pair of rectangular conductive rubber electrodes, one pencil electrode, holding bands, mains cable, instruction book and carrying bag.

Diagnostic Stimulator

Model No: IFT – 1M

DIMENSION

· Width – 29.5 cm.

· Height – 9.5 cm

· Depth – 25 cm

· Weight – 2.2 Kg.

SPECIFICATIONS

· Input: 150-260 V, AC, 1 Ph, 50 Hz

· Output:

60 mA RMS at 500 ohms.
Base Frequency: 1-100 Hz.
Sweep Frequency: 1-150 Hz.
Carrier Frequency: 4 KHz. For deeper penetration.
Spectrum Programme: Rectangular, Triangular and Trapezoidal.
Vector: 45 and 90 degree rotating scan vector.
Control & Indications: Microcontroller based 2x16 Character panel displays time, modes of treatment and output current of both channels.
Inbuilt safety features: Must bring output intensity control to zero before every operation. Setting can not be altered once the treatment is on. Audible buzzer at the end of treatment time.

Standard Accessories: Two sets of rectangular conductive rubber electrodes with holding bands, mains cable, instruction book and carrying case.